Grass And Willow Weaving Products Handicraft Production Process

Grass wicker products is generally referred to as the straw products and wicker products, such as straw crafts have fruit box, paper basket, fruit tray, bread box, flower pot cover, disc, rectangular plate, hanging scaffold basket, basket, wall, etc., wicker crafts and flower pot cover, bread basket, flower basket, fruit tray, faceplate, tong basket, basket, cat litter, bird's nest, egg basket, basket, etc. Straw weaving products and willow weaving products are basically the same production process, roughly divided into material selection, coloring, soaking, weaving, fumigation, cooling, painting and other seven links, all made by hand.

1, material selection. Choose corn husk, to remove the outermost layer of old skin, color consistent, color is white. The selected straw, color should be natural color, thickness, length according to need. Thatch is best when it grows old. Choose wicker, willow is the best to fu Days, when the wicker is more mature, easy to peel, white color, diameter is about 1-5 mm, length of 60 cm.

2, color. According to the design requirements, the required colors will be evenly coated on the material surface, and dried.

3. Soak. Put the colored material into the water. The corn husks just need to be wet, otherwise, over time, they'll turn yellow. Thick wicker should soak for 20 minutes and thin wicker for 10 minutes. The purpose of soaking is to make it soft, easy to bend, flatten its strength and facilitate weaving.

4. Knitting. According to certain shapes and specifications. All the tools are: iron stick, fruit scissors, rulers and so on.

5, steamed. The finished product that braid gives, should undertake scrub with washing powder. Its purpose: it is to clean, 2 it is to increase humidity. Then, the finished product is put into the fumigating chamber and fumigated for 2 hours with the sulfur placed in the container. During fumigation, the doors and Windows of the fumigating chamber must be sealed.

6, cool. After fumigation, finished products should be promptly cooled, fumigated and cooled in order to prevent mildew and deformation.

7, paint. After drying, brush varnish, make its durable, not easy fade, increase brightness, beautiful and good-looking.